ShaliPrime® 2E SF
2K Solvent Free Epoxy Primer for Concrete Surface
ShaliPrime® 2E SF is two component transparent, solvent free, epoxy primer, suitable for priming concrete surfaces, including walls, prior to the application of any Epoxy / PU Flooring or coating., epoxy repair Mortar and elastomeric PU Liquid Membrane.
- Used as primer on concrete surface prior to the application of base coat / floor toppings like ShaliFloor 3 ES, ShaliFix EM, ShaliFloor SL TC 3 PU.
- In Traffic deck system for heavy duty traffic.
- Ramps / car parks / parking bays / pedestrian walkways / roof decks.
- Industrial floors, cold stores / warehouses / factories and hangars
- Laboratories / hospitals / food and beverage plants / kitchens, high tech manufacturing facilities / dairies,
- Material is 100 % solid and is Solvent Free.
- Facilitates better bonding. of Epoxy Floor Topping, Epoxy Screed and Epoxy Mortars with the substrate.
- Prevents air release from the porous substrate, which may otherwise cause bubbles in the final epoxy topping later.
- Seals porous surface to give quality finish.
Health & Safety
- Avoid contact with skin / eyes and avoid swallowing.
- Ensure adequate ventilation and avoid inhalation of vapour.
- Wear suitable protective clothing, gloves and eye protection.
- In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
- In case of eye contact, wash with plenty of clean water and seek medical advice.
- If swallowed, seek medical attention immediately. Do not induce vomiting.
Available in 4 L unit pack consist of Comp. A – 3 L and Comp B – 1 L.
Store in a cool dry place, under shed, away from heat.
12 months in original unopened sealed condition