ShaliProtek® E MIO 60
2K Polyamide Epoxy Intermediate Anti-Corrosive Coat
ShaliProtek® E MIO 60 is a two component, high build polyamide cured coating, pigmented with micaceous iron oxide.
ShaliProtek® E MIO 60 offers good resistance against abrasion and impact, when cured, and provides an excellent barrier against penetration of water and water vapour.
ShaliProtek® E MIO 60 can be used as primer or intermediate coat.
- Protection of steel structures in aggressive coastal & industrial atmosphere.
- Ship loaders.
- Hoppers, conveyors silos, storage tanks, pipelines and general steel structures in fertilizer plants, refineries, petrochemicals, chemical plants, engineering industries, etc.
- Easy to Apply.
Cleaning & Maintenance
Clean all tools immediately after use with STP Thinner. Do not allow material to harden.
Health & Safety
- The product should not come in contact with the skin and eyes or be swallowed.
- Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
- Wear suitable protective clothing, gloves and eye protection.
- In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
- In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
- If swallowed seek medical attention immediately – do not induce vomiting.
Available in 20 L unit pack.
Store in a cool dry place, under shed, away from heat.
12 months in original unopened sealed conditions.