Water Based UV Resistant Elastomeric PU Liquid Membrane
ShaliUrethane® BTD is UV resistant, high performance, water based, cold applied, single component elastomeric in-situ liquid membrane for waterproofing. ShaliUrethane® BTD forms a seamless monolithic membrane, which can be applied on moist surface not exceeding 5%.
It conforms to ASTM C 836 and ASTM D 6083.
Use Horizontal / Vertical grade of ShaliUrethane® BTD for horizontal / vertical application respectively.
- Roof / Terraces, including corrugated roof.
- Terrace garden.
- Planter boxes.
- Can be applied on moist surface also.
- Excellent water vapour barrier.
- High Crack Bridging.
- Monolithic / seamless in-situ Membrane.
- Excellent adhesion to concrete.
- Excellent elongation and very good low temperature flexibility.
Health & Safety
• Avoid contact with skin / eyes, and avoid swallowing.
• Ensure adequate ventilation and avoid inhalation of vapor.
• Wear suitable protective clothing, gloves and eye protection
• In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
• In case of eye contact, wash immediately with plenty of clean water and seek medical advice.
• If swallowed seek medical attention immediately. Do not induce vomiting.
Available in 25 kg and 250 kg pack.
Store in a cool dry place, under shed, away from heat.
12 months in original unopened sealed condition.