ShaliUrethane® TC 100
Single Component Moisture Cure Aliphatic Polyurethane Top Coat
ShaliUrethane® TC 100 is a single component, moisture cured, polyurethane aliphatic top coat filled with special grade of fillers that offers superior bonding, flexibility and corrosive resistance to the substrate and gives excellent abrasion resistance.
- Apply as Exterior pipeline Coating.
- Structural steel, bridges, ballast tanks, storage tank, etc.
- Apply in Power, Oil and Gas sector including waste water treatment, chemical / fertilizer plants / Cooling tower.
- It is Compatible with most old coatings.
- Not required any Induction time.
- Material is High resistance to majority of chemicals and abrasion.
Cleaning & Maintenance
Clean all tools immediately after use with STP cleaner.
Health & Safety
- Avoid contact with skin / eyes, and avoid swallowing.
- Ensure adequate ventilation and avoid inhalation of vapour.
- Wear suitable protective clothing, gloves and eye protection.
- In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
- In case of eye contact, wash with plenty of clean water and seek medical advice.
- If swallowed, seek medical attention immediately. Do not induce vomiting.
Available in 20 L MS Drum,
Store in a cool dry place, under shed, away from heat.
6 months from the date of manufacture when maintain in protected storage in original unopened sealed condition at 5 – 38 OC.