Energy Saving Micro Fiber Reinforced Acrylic Liquid Membrane

Single component, energy saving, UV resistant, elastomeric, micro fiber reinforced , heavy duty monolithic / seamless waterproofing liquid membrane.

UV Resistant Elastomeric Exterior Acrylic Waterproofing Coating

Single component, UV resistant, unique elastomeric, anti-carbonation, high build exterior waterproofing coating based on a revolutionary acrylic polymer.

UV / Weather Resistant Exterior Acrylic Silicone Top Coat

Single component, UV resistant exterior emulsion paint based on silicone modified acrylic polymer with excellent weatherability, water, dirt pickup and stain resistance.

2K Cementitious Anti-root Elastomeric Waterproofing Coating

ShaliCem^® EWP AR is ready to use two component anti-root waterproofing coating based on graded cement, in combination with selected admixtures, synthetic resins and polymers.

Polymerised High Solid Acrylic Coating

ShaliCrete^® 47 is a multifunctional polymerised acrylic polymer with 47% solid contents for enhancing properties of concrete, mortar, grout, cement slurry etc.

Integral Liquid Waterproofing Compound For PCC / Plaster

ShaliPlast^® IW is integral liquid waterproofing compound composed of surface active agents, plasticizers, polymer and additives. It is also used as an additive for PCC/ mortar/plasters to make concrete cohesive by reducing cement voids /capillaries.

Bonding Admixture For Adhesion & Repairs Of Concrete Structures

ShaliSBR Latex is a carboxylated styrene butadiene copolymer latex for integral adhesive for slurry bond coats, mortars and concrete to improve strength .

Cementitious Crystallization Waterproofing

ShaliCrystal^® 200 (formerly known as PeneSeal CWP) is a concrete waterproofing system formulated from Portland cement, fine quartz sand and active chemicals.

Moisture Cured High Tensile Elastomeric PU Liquid Membrane

It is a single component, high tensile, high solid, moisture cured, modified Polyurethane elastomeric liquid membrane for waterproofing with an elongation of 700 % ± 50.

2K High Tensile, UV Resistant PU Water Proofing Liquid Membrane

It is a two component, high tensile, UV resistant, elastic, cold applied Polyurethane liquid membrane for water proofing and surface protection.

Water Based Elastomeric High Abrasion PU Top Coat

ShaliProtek^® PU HA is a single component, water based, high abrasion, UV resistant, weatherstable cold applied, pigmented elastomeric polyurethane top coat .

Polyester Reinforced APP Modified Anti-Root WP Membrane

SuperThermoLay^® AR is an uniquely formulated pre-fabricated plastomeric Anti-root waterproofing membrane with spun bonded polyester mat at its core. SuperThermoLay^® AR has an excellent resistance to weather and ageing

Polyester Reinforced APP Modified Fire Retardant WP Membrane

SuperThermoLay^® FR is an uniquely formulated pre-fabricated plastomeric fire retardant waterproofing membrane with spun bonded polyester mat at its core

High Performance SBS Modified Self-Adhesive Membrane

SuperTene^® is a self-adhesive SBS (Styrene Butadiene Styrene) based waterproofing membrane with high density polyester film on one side and easy-to-peel silicon film on the other side.

APP Modified Non-woven Polyester Based Pliable Membrane With Release Film

TarFelt^® APP is uniquely formulated, cold applied, pre-fabricated, economic elastomeric waterproofing membrane with non-woven polyester mat core.

APP Modified Polymeric HMHDPE Membrane

Superior ShaliPlus^® is a heavy duty APP modified polymeric waterproofing membrane, with high quality polymeric bituminous mix having high softening point, high heat resistance and cold flexibility sandwiched between two thermo fusible high-density polyethylene sheet (HMHDPE) on both sides.

Hessian Based Bituminous Waterproofing Membrane

TarFelt^® BH, is produced by saturating centre core of hessian with straight grade bitumen and coated with specially formulated bituminous compound on both sides

Glass Fiber Based Bituminous Waterproofing Membrane

TarFelt^® FG is Glass Fiber based Bituminous Waterproofing Felt produced by coating a center core of 40 gsm Glass Fiber with bituminous coatant on both sides. Mica / sand is then spread over top and bottom layer to prevent inter layer sticking. It conforms to S: 7193 / 2013.

Ethylene Prolylene Diene Monomer Waterproofing Membrane

ShaliEPDM is a synthetic single ply preformed Waterproofing Membrane in black colour. It is available in roll form with following dimensions.

Water Based PU Waterproof coating

ShaliUrethane® WPU is high performance, water based, cold applied, single component elastomeric liquid membrane for waterproofing of concrete surfaces.

Liquid / Powder Waterproofing And Plasticizing Admixture

STP No 1 when used as an admixture forms an internal barrier against water penetration. It also increases the plasticity of mortar, reduces water absorption and thereby guards against freeze- thaw damage.

Thermoplastic Polyolefin – Homogeneous single ply membrane

ShaliTPO HG FB is a single ply thermoplastic polyolefin, non-reinforced homogeneous roofing membrane with an excellent impermeability to water and moisture, the joints are hot welded to form a continuous water tight seam.

Thermoplastic Polyolefin – Polyester reinforced fleece membrane

ShaliTPO PR FB is a single ply thermoplastic polyolefin, reinforced with polyester scrim, fleece back roofing membrane with an excellent impermeability to water and moisture, the joints are hot welded to form a continuous water tight seam.

High Elongation Heavy Duty Insulating Self-Adhesive Membrane

SuperTene^® 7 (Ver2.) is a self-adhesive SBS (Styrene Butadiene Styrene) based pre-formed insulating cum waterproofing membrane with high density 4 ply cross laminated tough polyethylene film on one side and easy-to-peel silicon film on the other side.

2K Modified Fast Setting Polyurea Elastomeric Coating

ShaliProtek® PuR 100 is a two component, 100% solids, spray applied, rapid curing polyurea coatings for concrete / metal surface with very high durability and excellent flexible characteristics.

Geomembrane for Tunnels / Basement and Protected Roof

ShaliPVC is a non-reinforced geomembrane, opaque, polyvinyl chloride membrane suitable for tunnels / basement and protected roof with signal layer (twin color). ShaliPVC is not resistant to UV.